Hydralite Jacks Fitted with Bellows
Where Hydralites are used in adverse working conditions subjected to dust, grit or weld spatter, causing damage to the ram and liner, bellows can be fitted to protect these parts to extend the working life.

They can be supplied in either woven heat-resistant material, where high temperature substances such as weld spatter are present, or in P.V.C. for use in industry conditions.

They are supplied complete with a special deepened ram cap and securing clips.

NOTE: The fitting of bellows slightly increases the closed height of the jack. Not suitable for screwed ram or claw jacks.

For full details contact your usual distributor or Tangye Ltd.

Gauges
Gauges reading tons load on the ram can be fitted to the Hydralite Range. It is then possible to assess the load applied to the jack during operation. It can also be used as a weighing device.